StitchAndGrid My projects Make a pattern

Cross stitch guides › Finishing an ornament

How to finish a cross stitch ornament

A flat ornament is card on the inside, the stitching wrapped over the front and felt on the back, with a loop to hang it and a cord to hide the join. It takes an evening, and nothing about it is hard.

What you need

  • Your stitching, washed and pressed, with its margin still on.
  • Stiff card or plastic canvas for the inside. Mount board or the back of a notebook works; plastic canvas never bends or softens if the ornament gets damp.
  • Felt for the back, in a color that suits the front.
  • Narrow ribbon, about 8 inches (20 cm), for the loop.
  • Strong sewing thread and a needle, or fabric glue.
  • Thread for the cord: one of the colors in the design, usually the one on its outside edge.

Every free pattern on this site gives these sizes for its own design, under “Finishing it”. For your own design, the fabric calculator gives the stitched size to start from.

Finished, from the front Stitched Aida Card Ribbon loop Felt, a little smaller gatheredbehind
The layers of a flat ornament: stitching gathered over card, the ribbon loop fixed to the back, felt over the top.

Step by step

  1. Cut the card. Draw round the outline of the stitching on paper, one bare row of fabric outside the last stitch, and cut it out as a template. Trace it onto the card and cut that out. Round, heart and square designs all work the same way.
  2. Trim the fabric. Lay the card on the back of the stitching, centered behind it, and cut the Aida about ¾ inch (2 cm) beyond the card all round.
  3. Gather it over the card. Sew a line of running stitches ¼ inch (6 mm) in from the cut edge. Lay the card on the back and pull the thread up, so the fabric wraps over the card like a drawstring bag. Check the front is centered and smooth, then knot it. On a square, fold the corners in first, like wrapping a present.
  4. Lace it if it is large. On anything over about 4 inches (10 cm), a few long stitches across the back from side to side, pulled snug, keep the front tight.
  5. Add the loop. Fold the ribbon in half and stitch or glue both ends to the back at the middle of the top edge, so the loop stands up above it.
  6. Cut the felt to the card template, then trim it a little smaller all round so it does not show from the front.
  7. Fix the felt over the back, covering the gathers and the ribbon ends. Whipstitch round the edge, catching felt and fabric, or glue it.
  8. Twist a cord (optional). Cut two lengths of six-strand thread, each three times as long as the edge plus a little. Knot them together at both ends, hook one end over a door handle, and twist the other end until the thread kinks when you relax it. Bring the ends together and let it twist back on itself. Knot the ends.
  9. Couch the cord round the join between the front and the felt with tiny stitches in matching thread, starting and finishing at the top, where the loop hides the join.

Mistakes that are easy to avoid

  • Cutting the card to the stitching exactly. The fabric needs a row of bare Aida to turn over the edge, or the last stitches wrap round to the back.
  • Trimming too close. Under half an inch leaves nothing to gather.
  • Glue on the front. Fabric glue soaks through Aida and shows. Keep glue to the back and use it sparingly.
  • Felt the same size as the card. It peeps out from the front. A slightly smaller piece is invisible.
  • Skipping the wash. Handling leaves marks you will not see until the ornament has hung for a season.

Questions people ask

Do I need card inside?

For a flat ornament, yes: it keeps the front smooth and the shape true. For a soft ornament, sew the stitching and a felt back together round the edge and stuff it lightly with polyester filling instead.

Can I use glue only?

Yes. Glue the fabric margin to the back of the card instead of gathering it, then glue the felt on. It is quicker; gathering is neater on round shapes and easier to undo.

What if the ornament will be posted?

Plastic canvas inside and a stitched, not glued, back survive the post best.

Can I finish it in a small hoop instead?

Yes. A 3 or 4 inch hoop makes a quick ornament: see finishing in a hoop.

More guides