StitchAndGrid My projects Make a pattern

Cross stitch guides › How to wash and press

How to wash and iron cross stitch

Hours of handling leave oils and hoop marks on the fabric, even when it looks clean. A gentle wash and a careful press make the stitches stand up and the piece look finished.

Before you wash: two checks

  • Will the colors run? Standard cotton threads from the main brands are made to be colorfast. Hand-dyed and some very dark or red threads may not be. To test, press a damp white cloth on the back of the stitches for a minute. If color comes off, do not wash; spot-clean around the stitching instead.
  • What does the fabric label say? Check the washing instructions that came with the fabric or kit, and follow them if they differ from this page.
  • Is everything washable? Do not soak pieces with metallic threads, beads sewn on with weak thread, silk, wool, or fabric that says “do not wash”. Painted or printed fabrics need the maker’s advice.

Washing

  1. Fill a clean bowl with cool to lukewarm water and a few drops of mild, clear washing-up liquid or a soap made for delicate fabrics. No bleach, no brighteners.
  2. Lay the piece in the water and let it soak for 10 to 15 minutes. Move it gently. Do not rub the stitches.
  3. Rinse in cool running water until no suds remain.
  4. If a color starts to run, keep rinsing in cold water until it stops. Do not let the piece sit.

Drying

  1. Do not wring. Lay the piece flat on a clean white towel and roll it up like a Swiss roll. Press the roll to take up the water.
  2. Unroll and lay it flat on a dry towel, face up, pulling it gently square.
  3. Leave it until just damp. Damp, not wet, is the right moment to press.

One exception. Heat and damp together can make a doubtful dye run even when a cool wash did not. If you used hand-dyed thread, or a color bled a little in the rinse, let the piece dry completely before you press it, and use no steam.

Pressing

  1. Lay a thick, clean towel on the ironing board.
  2. Place the piece face down on the towel. The stitches sink into the pile and keep their shape.
  3. Cover the back with a thin cotton cloth if you like.
  4. Press with a warm iron, lifting and lowering instead of sliding hard. No steam is needed while the piece is damp. For a stubborn crease in a dry piece, a little steam helps.
  5. Keep the iron off metallic threads and beads: lay a second cloth over them and press around them lightly.
  6. Leave it flat until fully dry before mounting.
thick towelyour piece, stitches facing downthin clothwarm iron
Press from the back, on a towel, so the stitches keep their shape.

If you would rather not wash

A piece that has been kept clean can simply be pressed. Mist the back lightly with clean water and press face down on a towel as above. Stubborn hoop marks usually need the full wash.

Mistakes that are easy to avoid

  • Hot water. Heat is what makes dyes run and fabric shrink.
  • Ironing the front. It flattens the stitches and can leave a shine.
  • Ironing before washing a marked piece. Heat sets dirt and oils into the fabric. Wash first, then press.
  • Hanging it to dry. The weight of the water pulls the fabric out of shape.
  • Leaving the hoop on between sessions. Take it off when you stop; the marks will be far lighter.

Questions people ask

Do I have to wash cross stitch?

No, but most pieces look better for it. Skip it when the threads or fabric are not washable.

Can I use a washing machine?

Hand washing is safer. A machine rubs the stitches and frays the edges.

How do I get hoop marks out?

A soak and a press on the back while damp removes nearly all of them.

Checked against the care advice DMC publishes for finished needlework (DMC: how to clean and wash finished needlework), 16 November 2026: hand wash gently in cool water with mild detergent, and press face down on towels with a warm iron.

Once it is dry, the next step is mounting it in a hoop, or framing it. The hoop and frame calculator gives the size.

More guides