Cross stitch patterns › Christmas › Personalized stocking
Personalized Christmas stocking cross stitch pattern
Type a name and get a free cross stitch chart for a Christmas stocking: just the name for a ready-made stocking with an Aida cuff, or a whole stocking with the name on its cuff. The name is set in the largest alphabet that fits, and the PDF lists every DMC thread.

Loading the alphabets…
| DMC | Name | Stitches | Skeins |
|---|
Four stocking designs
Each design is drawn from the stocking’s width, so it keeps its shape at every size, and each uses five threads or fewer apart from Santa’s face. Press a design to try it with your name.
A name on a ready-made cuff, or the whole stocking?
Most stitchers who want a name on a stocking buy one ready-made with a band of Aida sewn into the cuff, and stitch only the name. It is the quick route: the name is a few hundred stitches, done in an evening or two, and the stocking is already lined and sewn. The cuffs vary from maker to maker, so measure the Aida on yours: one maker of these stockings gives the stitchable area of its cuffs as about 4 by 7 inches, roughly 60 by 100 stitches on 14 count. That is why the tool starts at 7 by 4 inches.
Stitching the whole stocking makes an heirloom, and it is a big project. Every stitch of the body is filled in, as on a printed or knitted stocking. Here is what each size comes to with a five-letter name on 14 count Aida, worked out by the tool itself:
| Size | Stitches wide × high | Finished on 14 count | Stitches | Time at 100 an hour |
|---|---|---|---|---|
| Small | 123 × 147 | 8.8 × 10.5 in (22.3 × 26.7 cm) | 12,135 | about 121 hours |
| Medium | 149 × 178 | 10.6 × 12.7 in (27 × 32.3 cm) | 18,129 | about 181 hours |
| Large | 174 × 209 | 12.4 × 14.9 in (31.6 × 37.9 cm) | 25,213 | about 252 hours |
| Extra large | 200 × 240 | 14.3 × 17.1 in (36.3 × 43.5 cm) | 33,602 | about 336 hours |
Stocking kits from the big kit makers are mostly 16 to 18 inches long on 14 count Aida, which is the extra large size here. If you want a whole stocking for this Christmas, start now with the small or medium size, or stitch it on 11 count Aida: the same chart comes out 27% larger, with fewer, bigger stitches to the inch, though the number of stitches stays the same.
How the name is fitted
The tool sets the name in each of thirteen alphabets, from the tallest (Storybook Bold 18, capitals 18 stitches high) to the smallest (Petite 6), and keeps the first one whose stitches fit the space, including the tails of letters such as g and y. On a ready-made cuff the space is the Aida less half an inch on every side, so the name never runs into a seam. On a whole stocking it is the white cuff less four stitches each side.
A long name comes out in a smaller alphabet: on the same 7 by 4 inch cuff, “Emily” fits Bookish 14 with a snowflake each end, and “Christopher” fits Narrow Bold 12. For a family set, choose one alphabet yourself so every stocking matches, and check that the longest name still fits: the tool warns you if it does not.
Stitching a name on a ready-made cuff
- Find the center of the cuff. Fold the Aida band in half each way and mark the middle with a pin, or count the squares. The middle of the chart is marked by the arrows on its edges. Our guide to finding the center shows both ways.
- Stitch through the Aida only. The Aida on most cuffs is sewn onto a lining or the stocking itself. Reach inside the cuff so the needle comes back out without catching the layer behind, or the stocking will not open fully.
- Start with the middle letter and work outwards, so the name stays centered even if you miscount. Two strands of six suit 14 count Aida; use three on 11 count for fuller letters.
- Keep the back neat. The back of the cuff is hidden but still touched: run thread ends under a few stitches rather than tying knots, as in our guide to starting and ending a thread.
Making the whole stocking up
The chart gives the stitched front. To turn it into a stocking you need three more pieces the same shape: a back, often felt or velvet, and two pieces of lining. A sewing machine helps, and many needlework shops will finish a stocking for you if you would rather not sew.
- Cut the front. The tool tells you how much fabric to cut, with 3 inches spare on every side. When the stitching is done and pressed, cut around the stocking leaving about half an inch beyond the outline for the seam. Use the cut front as the template for the back and the two lining pieces, turning it over for the back.
- Sew the outer stocking. Put the front and back right sides together and sew around the outline just outside the last row of stitches, leaving the top open. Aida is loosely woven, so use a short stitch length and sew the seam twice. Clip the curves at the heel and toe, then turn it right side out.
- Sew the lining the same way, leaving a gap of a few inches in one side seam, and do not turn it.
- Add the loop and join them. Pin a loop of ribbon at the top of the back seam, pointing down. Slip the outer stocking inside the lining, right sides together, and sew around the top edge. Pull the stocking out through the gap, close the gap by hand or machine, and push the lining inside.
- Padding is optional. If you add a thin batting for a quilted feel, put a layer of plain cotton between it and the Aida, or its fibers work out through the holes in the fabric.
For the stitching itself, the guides to choosing fabric and washing and pressing cover the rest. The chart can also be stitched on red or green Aida with the body left bare: choose “Open in the pattern maker” and remove the body color.
Questions people ask
Is the stocking pattern free?
Yes. Typing a name, choosing a design and downloading the PDF are all free, with no account and nothing added to the chart. You can stitch it as a gift or sell the finished stocking.
How long a name fits on the cuff?
It depends on the cuff, not on a fixed number of letters. The tool tries our alphabets from the largest down and uses the biggest one the name fits. On a cuff with 7 by 4 inches of Aida, “Emily” is set in Bookish 14 with a snowflake each side, and “Christopher” in Narrow Bold 12. Up to 14 letters can be typed.
What size is the finished stocking?
On 14 count Aida the medium stocking is 10.6 by 12.7 inches, and the extra large one 14.3 by 17.1 inches, about the length of most stocking kits. On 11 count every size comes out 27% larger (14 ÷ 11 = 1.27).
Can I put the name on a stocking I already have?
Yes, if its cuff is Aida. Choose “Name for a ready-made cuff”, measure the Aida part of the cuff, and the tool fits the name inside it with half an inch clear on every side. If the cuff is felt or knit, stitch the name on a strip of Aida instead and sew the strip on.
Why is the whole stocking so many stitches?
Because the body is filled in, as on a printed stocking. The medium size is 18,129 stitches, about 181 hours at 100 stitches an hour. For a December deadline the ready-made cuff is the realistic choice: a name is usually a few hundred stitches, an evening or two.
Which alphabets can it use?
Thirteen of our whole-stitch alphabets, from Storybook Bold 18 down to Petite 6. Every one has capitals, small letters and accented letters, so names such as Zoë or José work. Pick one yourself under “Alphabet” if you would rather all the family’s stockings match.
Can I change the colors or add something?
Press “Open in the pattern maker”. The stocking opens there with all its stitches, and you can change any thread, draw on more, or stitch along on your phone and keep your progress.