Cross stitch guides › Cross stitch fabric guide
Cross stitch fabric: what to choose and how much to buy
Four choices decide a piece of cross stitch fabric: the kind, the count, the color and the size. This page takes them in the order you meet them in a shop, and ends with the sum for how much to buy.
The short answer
For a first project, or any pattern that does not say otherwise, buy 14 count Aida in white or antique white, cut 3 inches (7.5 cm) larger than the design on every side. Everything below is for when you want something different, and why.
Every kind of fabric, at a glance
| Fabric | What it is | Usual counts | Buy it when |
|---|---|---|---|
| Aida | Cotton woven in small blocks, with a clear hole at each corner. Stiff when new | 11, 14, 16, 18, 20 | You are starting out, the pattern is whole stitches, or you like to stitch without a hoop |
| Evenweave | Single threads of even thickness, usually cotton blended with viscose. Soft and smooth | 25, 28, 32 | The pattern has many part stitches, or large areas stay bare and you want them to look like cloth |
| Linen | Single flax threads of uneven thickness. Soft, with a natural texture | 28, 32, 36, 40 | You are stitching a sampler or an heirloom and are used to counting threads |
| Hardanger | Cotton woven in pairs of threads | 22 | Very fine work over one pair, or bold work over two |
| Pre-gridded Aida | Aida with a colored line every ten squares that washes out or is pulled out | 14 and finer | You lose your place when counting on large designs |
| Waste canvas | A stiff grid tacked onto ordinary cloth and pulled out after stitching | Several; 14 is common | You want cross stitch on clothing, a tote bag or a towel |
| Soluble canvas | A gridded film that dissolves in water | 14 | The same jobs as waste canvas, on fabric that can be soaked |
| Plastic canvas | A stiff plastic sheet with holes | 7, 10, 14 | Ornaments, keyrings and anything that must hold its shape |
| Perforated paper | Stiff card punched with a grid of holes | 14 | Cards, bookmarks and tree ornaments that need no hemming |
The first three are the fabrics most patterns are written for. How they differ under the needle has its own page: Aida vs evenweave vs linen.
Choosing the count
The count is the number of holes to the inch, and it sets the size of every stitch. A higher count gives smaller stitches and a smaller, finer picture. Evenweave and linen are stitched over two threads, so halve their count to compare: 28 count stitches the same size as 14 count Aida, and 32 the same as 16. Fabric count explained goes through this with drawings.
- 11 count: large stitches, easy to see. Good for children and for tired eyes. Needs three strands to cover.
- 14 count, or 28 over two: the standard. Most patterns give their size on it.
- 16 count, or 32 over two: a little finer, and the choice of many experienced stitchers. Two strands cover it fully.
- 18 count, or 36 over two: fine detail in a small space. Good light helps.
The same pattern, 100 stitches wide and 80 high, comes out at these sizes:
| Fabric | Stitched size | Piece to buy, with 3 in spare each side |
|---|---|---|
| 14 count Aida | 7.1 × 5.7 in | 13.1 × 11.7 in (33.4 × 29.8 cm) |
| 18 count Aida | 5.6 × 4.4 in | 11.6 × 10.4 in (29.4 × 26.5 cm) |
| 28 count evenweave or linen, over two | 7.1 × 5.7 in | 13.1 × 11.7 in (33.4 × 29.8 cm) |
| 32 count evenweave or linen, over two | 6.3 × 5 in | 12.3 × 11 in (31.1 × 27.9 cm) |
To try a pattern on a different count before buying, use the fabric count converter.
Names you will see on the label
Evenweave and linen are often sold under the weaver’s own names, which tell you the count and the fiber once you know them. These are fabrics from Zweigart, the German weaver whose names are the ones most patterns quote.
| Name | Count | Made of | Stitches like |
|---|---|---|---|
| Cashel | 28 | Linen | 14 count Aida |
| Belfast | 32 | Linen | 16 count Aida |
| Edinburgh | 36 | Linen | 18 count Aida |
| Lugana | 25, 28, 32 and finer | Cotton and viscose (modal) | 12.5, 14 and 16 count Aida |
Other makers use other names. If a label gives a name you do not know, look for the two facts that matter: the count, and whether it is stitched over one or over two.
Choosing the color
The fabric is the background of the picture wherever you do not stitch, so its color matters as much as any thread.
- White is crisp and makes colors look bright. White and very pale threads vanish on it.
- Antique white, cream and ivory are softer and kinder to traditional designs. They are the safest choice when you are unsure.
- Natural, oatmeal and raw linen suit samplers and country designs, and let white stitches show.
- Pale colors can stand in for a stitched background: light blue for a sky, pale green for a field.
- Black and navy make bright threads glow, and are much harder to see the holes in. Lay a white cloth on your lap to show the holes up, and stitch in good light.
- Hand-dyed and mottled fabrics give a clouded background. They may not be colorfast, so check before washing.
Hold the main threads of the pattern against the fabric before you buy. If the pattern has a lot of white, snow or pale lettering, avoid white fabric. Stitches also cover less than a chart suggests: on a dark fabric, a pale thread may need an extra strand to hide the ground.
How much to buy
The sum has three steps.
- Find the stitched size. Divide the stitch count by the stitches to the inch. For 100 by 80 stitches on 14 count: 100 ÷ 14 = 7.1 inches wide, and 80 ÷ 14 = 5.7 inches high.
- Add the margin twice. Three inches on each side is six inches added to each measurement: 13.1 by 11.7 inches.
- Round up to a size that is sold. Fabric is sold in set cuts, by the fat quarter, or off the bolt.
The fabric calculator does the first two steps for any pattern and fabric, in inches and centimeters.
Three inches a side suits a framed piece. Other finishes need more or less: an ornament needs about an inch, and a piece worked on a scroll frame needs extra at top and bottom to attach it. The fabric margin planner gives the margin for each way of finishing.
Cut sizes, fat quarters and the bolt
Shops in the United States commonly sell evenweave and linen in set cuts. These are the cuts one large needlework shop lists, with the smallest that holds the example pattern on each fabric:
| Cut | In centimeters | Holds a stitched area up to |
|---|---|---|
| 9 × 13 in | 22.9 × 33 cm | 3 × 7 in with 3 in spare each side |
| 13 × 18 in | 33 × 45.7 cm | 7 × 12 in with 3 in spare each side |
| 18 × 27 in | 45.7 × 68.6 cm | 12 × 21 in with 3 in spare each side |
| 27 × 36 in | 68.6 × 91.4 cm | 21 × 30 in with 3 in spare each side |
The example pattern needs the 13 × 18 in cut on 14 count or 28 count, and the 13 × 18 in cut on 18 count. A cut may be turned sideways: only the two measurements have to fit.
In Britain the same fabrics are sold by the fat quarter, about 50 by 70 cm (19.5 by 27.5 inches), and by the half meter and meter. Aida is also sold everywhere in packaged pieces. Check the size printed on the packet against your sum, because packets differ.
A larger piece usually costs less per square inch, and the offcuts become bookmarks and ornaments. If you have several small projects planned on the same fabric, one large cut is the thrifty choice.
Before the first stitch
- Check the grain is square. If the piece was cut crooked, pull one thread near the edge and trim along the line it leaves.
- Stop the edges fraying. Fold masking tape over them, zigzag them on a sewing machine, or oversew them by hand. Linen and evenweave fray fastest.
- Do not wash it first unless the maker says to. The stiffness of new Aida is a help while stitching and washes out at the end. Hand-dyed fabric is the exception: test a corner for loose dye.
- Press out hard creases from the packet with a steam iron. A crease left in can stay for good.
- Find the middle. How to find the center shows two ways.
- Pick the needle and strands for the count. The needle and strands chart has both.
Mistakes that are easy to avoid
- Buying the size of the design. Without a margin there is nothing for the hoop or the frame to hold. Always add it.
- Buying by count alone. “28 count” on a label is linen or evenweave and stitches like 14, not 28. Read the fabric kind too.
- Buying white without thinking. Check the pattern for white and pale threads first.
- Trusting a kit’s fabric for a different pattern. A kit is cut for its own design. Measure before you reuse it.
- Choosing a count your eyes do not enjoy. A project on 18 count that never gets stitched is worse than the same one on 14 that does.
- Keeping fabric folded for years. Folds become permanent lines. Roll spare fabric round a tube, or store it flat.
Questions people ask
What is the best cross stitch fabric for beginners?
14 count Aida in white or antique white. The holes are easy to see, most patterns are sized for it, and it is the cheapest fabric to buy.
What do the numbers on cross stitch fabric mean?
The count: how many holes there are to the inch. On Aida that is also the number of stitches to the inch. On evenweave and linen, stitched over two threads, it is twice the number of stitches to the inch.
Can I use a different fabric from the one a pattern names?
Yes. Any chart can be stitched on any counted fabric. Only the size changes, and you can work that out before you buy.
Is Aida the same as cross stitch fabric?
Aida is the commonest cross stitch fabric, but not the only one. Evenweave and linen are used just as often by experienced stitchers.
How much extra fabric do I need around a design?
Three inches (7.5 cm) on every side for a piece that will be framed. Less for small ornaments and cards, more for a scroll frame.
Can I cross stitch on normal fabric?
Not by counting, because ordinary cloth has no grid. Tack waste canvas or stick soluble canvas on top, stitch through it, and remove it afterwards.
Where the facts come from
Fabric names, counts and fibers are those given for Zweigart fabrics in needlework shop listings, and the cut sizes are those one large United States needlework shop sells them in, both read 17 November 2026. A fat quarter is given as British shops list it. Sizes on this page are worked out by the same code as our fabric calculator. Counts for the special fabrics are the ones most often sold; makers differ, so check the label.
More guides
- Fabric count explainedWhat 14 count means, and how count changes the size of everything.
- Aida, evenweave and linenHow the three fabrics differ and which to choose.
- How to find the centerTwo reliable ways to start in the middle so the design sits straight.
- How to cross stitchThe whole craft from the first stitch to the last, for complete beginners.
- How to read a chartSymbols, keys, grid lines and arrows explained on a real chart.
- Starting and ending a threadNo knots: the loop start, the tail start and a clean finish.
- Cross stitch glossary58 terms in plain words.