StitchAndGrid My projects Make a pattern

Cross stitch guides › How to C2C crochet

How to C2C crochet (corner to corner)

C2C builds a blanket or a picture out of little tiles, worked in diagonal rows from one corner to the other. It needs only three stitches. This guide shows each step, then lets you watch a small graph grow row by row, with the written counts for every row.

chain 3becomes the “ch-3 space” the nextrow slip stitches into 3 double crochets(UK: trebles) side by side One tile is one square of the graph.
Every C2C project is built from this one tile, set on the diagonal.

What you need

  • Yarn: a smooth, light-colored worsted or DK for practice, so you can see the stitches.
  • A hook to suit it: the Craft Yarn Council suggests 5.5 to 6.5 mm for worsted and 4.5 to 5.5 mm for DK.
  • Three stitches: chain, slip stitch and double crochet. In UK terms the double crochet is a treble.
  • A graph, or the written rows from our crochet pattern maker.

The stitches, step by step

  1. The first tile (row 1). Chain 6. Work a double crochet in the 4th chain from the hook and one in each of the last two chains. The three chains you skipped stand at the end like a fourth post: they are the tile’s chain-3.
  2. Increase: a new tile at the start of a row. Turn. Chain 6, and work 3 double crochets into it as before. That is the new tile on the edge.
  3. The next tile in the row. Slip stitch into the chain-3 space of the tile in the row before, chain 3, and work 3 double crochets into that same space. Repeat across the row: each tile of the old row carries one tile of the new.
  4. End of an increase row. After the last tile, turn. Each increase row is one tile longer than the one before.
  5. Decrease at the start of a row. Instead of chaining 6, slip stitch across the tops of the 3 double crochets of the end tile and into its chain-3 space. Then chain 3 and work the tile there.
  6. Decrease at the end of a row. Slip stitch into the last chain-3 space and turn without making a tile there.

These are the standard steps used in most C2C patterns (the “6:3” method). If your tiles look loose, the “5:2” method chains 5 and 2 instead of 6 and 3.

Watch a graph grow, row by row

Here is a small heart, 7 tiles wide and 6 high, worked from the bottom right corner. Each frame adds one diagonal row, outlined in red, with the counts our maker writes for it. Even rows are read up the diagonal and odd rows down it, in the order you make the tiles.

  1. Row 1 (1 tile, first tile): 1 B
  2. Row 2 (read up from the bottom, 2 tiles, increase): 2 B
  3. Row 3 (read down from the right side, 3 tiles, increase): 3 B
  4. Row 4 (read up from the bottom, 4 tiles, increase): 4 A
  5. Row 5 (read down from the right side, 5 tiles, increase): 4 A, 1 B
  6. Row 6 (read up from the bottom, 6 tiles, increase): 1 B, 4 A, 1 B
  7. Row 7 (read down from the top, 6 tiles, increase at the bottom, decrease at the top): 4 A, 2 B
  8. Row 8 (read up from the left side, 5 tiles, decrease): 1 B, 4 A
  9. Row 9 (read down from the top, 4 tiles, decrease): 1 B, 2 A, 1 B
  10. Row 10 (read up from the left side, 3 tiles, decrease): 3 A
  11. Row 11 (read down from the top, 2 tiles, decrease): 2 A
  12. Row 12 (1 tile, last tile): 1 B

The heart takes 12 rows (7 + 6 − 1). The rows get longer until row 6, then the bottom of the heart reaches the far side and the rows start to shrink at one end while they still grow at the other, and from row 8 they shrink at both ends.

Squares and rectangles

A square graph increases at both ends until the middle row, then decreases at both ends. A rectangle has a stretch in between where each row increases at one end and decreases at the other, so the work grows longer without getting wider. Here is a graph 10 tiles wide and 6 high, each tile numbered with its row:

151413121110987614131211109876513121110987654121110987654311109876543210987654321Rows 1–6: increase at both endsRows 7–10: increase at the bottom,decrease at the topRows 11–15: decrease at both ends
Green rows grow at both ends, yellow rows grow along the bottom while shrinking at the top, red rows shrink at both ends.

The written rows in our maker say this in words on every row, for example “increase at the bottom, decrease at the top”, so you never have to work out which phase you are in.

Reading a C2C graph

  • One square is one tile. A graph 21 squares wide makes a piece 21 tiles wide.
  • Start in the bottom right corner unless the pattern says otherwise, and work in diagonal rows towards the top left.
  • Count each diagonal in the direction you are working it: the colors in order, and how many tiles of each.
  • Cross off rows as you finish them. It is very easy to repeat or skip a diagonal.

Written rows save the counting. Our free First heart pattern, 21 × 19 tiles, has all 39 rows written out, and all 103 of our C2C patterns do too.

Changing colors

  1. Change on the last stitch of the tile before. Work the last double crochet of the old color until two loops are left on the hook, drop the old color, and pull the new color through.
  2. Leave big areas attached. When a color carries on in the next row, leave it hanging at the edge of its area and pick it up when you come back.
  3. Carry only short distances. You can carry a color behind one or two tiles, but only where it will be covered by a tile of the same color. Otherwise, use a separate bobbin.

Bobbins: how many to wind

Each separate patch of a color needs its own small ball or bobbin. Our maker counts them for you: the Meow cat face, 64 × 52 tiles in 9 colors, has 45 separate color areas, so that is the most bobbins you could need, though small areas a few tiles apart can share one. Wind more yarn for big areas: the yarn table on each pattern page gives the yards for each color.

Size and yarn

In worsted yarn a C2C tile is usually about 0.9 inches and takes about 0.8 yards; so a graph 60 tiles wide makes about 51 inches. The crochet maker works out the size and yarn for any graph in any yarn weight, or from your own swatch, and can enlarge a small design to a blanket.

Finishing

  • Weave in ends as you go, every few rows. Leave tails of about 6 inches, weave them through the back of tiles of the same color, and do not pull tight.
  • Add a border of single crochet round the edge to straighten the stepped sides; work 2 or 3 stitches into the side of each tile.
  • Block it: pin it out flat to size, mist it with water, and leave it to dry.

Questions people ask

Is C2C good for beginners?

Yes. You need only chains, slip stitches and double crochets, and the tiles grow fast. The hard part is counting colors on a picture graph, which is why written rows help: each row tells you the colors in the order you make them.

Which corner do I start in?

Most graphs start in the bottom right corner and finish in the top left, which suits right-handed crocheters. Left-handed crocheters often start bottom left. Our maker writes the rows for either corner.

What is mini C2C?

A smaller tile, usually made with half double crochets and a shorter chain, so the same graph comes out smaller with more detail. In worsted a C2C tile is about 0.9 inches and a mini C2C tile about 0.5 inches.

Why do my tiles look loose or holey?

Try the 5:2 method: chain 5 to start a new tile and chain 2 instead of 3 for the rest. It makes a tighter tile with the same graph.

How do I keep my place on the graph?

Cross off each diagonal as you finish it, or use our crochet maker’s row tracker, which ticks rows off and outlines the row you are on.

Try it

More guides