Cross stitch calculators › Thread calculator
Cross stitch thread calculator
Estimate how much thread a project uses and how many skeins to buy, from the number of stitches, the fabric and the number of strands.
- Skeins to buyat least one of each color
- Thread used skeins m of -strand thread
- One skein makes aboutstitches on
- Stitches countedestimated from size and fillas you entered
Some colors will need more than one skein. A color with more than stitches needs a second.
Your project is kept on this device and follows you to the other calculators.
How to use it
- Enter the stitches to make. For one color, enter that color’s stitches and set colors to 1. Many patterns list stitches per color in the key.
- No stitch count? Leave it empty, enter the pattern size and say how full the design is.
- Choose the fabric and strands. Leave strands empty for the usual number on that fabric.
- Adjust the spare if you know your habits: 10% if you waste little, 30% if you carry thread across the back or use short lengths.
A worked example
4,800 stitches on 14 count Aida with 2 strands:
- One square of 14 count is 25.4 ÷ 14 = 1.81 mm wide.
- One cross uses two diagonals on the front and two straight moves on the back: 4.83 squares = 8.76 mm of each strand.
- Two strands with 20% spare: 8.76 × 2 × 1.2 = 21.0 mm a stitch.
- A skein is 8 m of six strands, which is 48 m of single strand, so one skein makes about 2,283 stitches.
- 4,800 ÷ 2,283 = 2.1 skeins of thread.
Mistakes that are easy to avoid
- Buying exactly the estimate. Dye lots vary. If a color is close to a whole skein, buy one more at the same time so the shade matches.
- Using the total for every color. The total tells you the least thread the project uses. Each color is bought separately, so check the big colors one by one.
- Forgetting backstitch and blended colors. Backstitch lines and half stitches use thread too. They are small, which is what the spare allowance is for.
Questions people ask
How many stitches does one skein of DMC make?
On 14 count Aida with two strands, about 2,283 cross stitches, allowing 20% for tails and travel. On 18 count with two strands it is about 2,935, because each stitch is smaller.
How is the estimate worked out?
From the size of one square of your fabric. A cross stitch lays two diagonals on the front and two short moves on the back, which is 4.83 square-widths of thread per strand. The calculator multiplies by your strands and stitches, adds your spare, and divides by the 48 meters of single strand in a skein.
How long is a skein of embroidery thread?
DMC and Anchor six-strand cotton both come in 8 meter (8.7 yard) skeins. Cut into its six strands, one skein is 48 meters of single strand.
Does fabric color or thread brand change the amount?
No. Only the fabric count, the number of strands and how you carry thread on the back change it.
Where the figures come from
- A skein of six-strand cotton holds 8 meters (8.7 yards) of thread: DMC Mouliné Spécial and Anchor Stranded Cotton. Source: Product listings for DMC Mouliné Spécial 117 and Anchor Stranded Cotton, checked 2026-11-16.
- Strands of six-strand cotton: 2 to 3 on 11 to 14 count, 2 on 16 count, 1 to 2 on 18 count, 2 on 28 count evenweave over two. Source: Caterpillar Cross Stitch, needle sizes guide, checked 2026-11-16.
Sizes are plain arithmetic: stitches divided by the stitches to the inch of the fabric. One inch is 2.54 cm.
Next step
- Cross stitch calculatorEverything for one project on one sheet: fabric, thread, needle, hoop, time and cost.
- Fabric calculatorHow big your design will be and how much fabric to cut.
- Time calculatorHow long a project will take at your own pace.
- Fabric count converterSee the same design on a different fabric count.
- Hoop and frame calculatorThe smallest hoop or frame that shows the whole design.
- Cost calculatorWhat a project costs in fabric, thread and extras.
- Needle and strands chartThe right needle size and number of strands for your fabric.
- Frame and mat calculatorThe mat opening and frame to order, and whether your fabric is big enough to mount.
- Pattern resize calculatorMake a design come out the size you want: which fabric, or how many stitches.
- Bead calculatorHow many beads and packets a pattern needs, with spare.
- Finish date calculatorThe stitches a day that finish a project by a birthday or a wedding.
- Skeins per color calculatorPaste your pattern’s key and get the skeins to buy for every thread.
- Fabric margin plannerHow much bare fabric to leave, by how the piece will be finished.
- Text generatorTurn words into a pattern and see its size.