C2C crochet pattern maker with written rows
Turn a photo, a name or any of our patterns into a corner-to-corner (C2C), mini C2C or tapestry crochet pattern. Every row is written out in the order you work it, with the size at your gauge, yarn for each color, a row tracker and a PDF. Free, with no account, and nothing leaves your device.
1. Choose a design
Or make one in the pattern maker, where you can draw square by square, and press “Crochet or knit it” there. Pictures stay on your device.
2. Your yarn and size
3. Your pattern
| Color | Your yarn (type its name) | Tiles or stitches | Yards (+15%) | Skeins |
|---|
Written rows
New to C2C? Our step-by-step guide, how to C2C crochet, shows every stitch and a graph growing row by row.
How the written C2C rows work
C2C is worked in diagonal rows of small tiles, each a chain of three and three double crochets. Row 1 is a single tile in the start corner; each row after it is one tile longer until the work reaches the sides, then the rows run along the long side, then they get shorter towards the far corner. Here is a graph 4 tiles wide and 3 high, and the rows the tool writes for it, starting in the bottom right corner:
- Row 1 (1 tile, first tile): 1 A
- Row 2 (read up from the bottom, 2 tiles, increase): 2 A
- Row 3 (read down from the right side, 3 tiles, increase): 1 B, 2 A
- Row 4 (read up from the bottom, 3 tiles, increase at the bottom, decrease at the top): 2 B, 1 A
- Row 5 (read down from the top, 2 tiles, decrease): 2 A
- Row 6 (1 tile, last tile): 1 A
The tiles are counted along each diagonal in the order you make them. Even rows are read up the diagonal and odd rows down it, which is why row 3 starts with B: reading down from the right side, the first tile is the B in the top right corner. Row 4 is the first row whose top end has reached the top edge, so from there you decrease at the top while still increasing along the bottom; on a design wider than it is tall that carries on until the bottom reaches the far side. If you hold your work the other way and your row 2 runs the opposite direction, tick “My row 2 goes the other way” and every row is reversed to match.
C2C, mini C2C or tapestry crochet
| One square on the graph | In worsted yarn | Yarn per square | Best for | |
|---|---|---|---|---|
| C2C | A tile: chain 3, 3 double crochets | about 4.7 tiles to 4 in | about 0.8 yd | Blankets with bold pictures; quick to grow |
| Mini C2C | A smaller tile made with shorter stitches | about 8 tiles to 4 in | about 0.5 yd | More detail in the same size |
| Tapestry crochet | One single crochet | about 12.5 stitches to 4 in | about 1.8 in, plus carried yarn | Bags, cushions, fine detail and lettering |
Tile sizes are the usual ones from published patterns and graph sellers, and single crochet gauge is the middle of the Craft Yarn Council’s range for each yarn weight. Every crocheter differs, so use them to plan and a swatch to buy yarn.
Tile size by yarn weight
A thicker yarn makes a bigger tile. Starting from about 0.9 inches a tile in worsted, other weights are scaled by their single crochet gauge:
| Yarn weight | Hook (Craft Yarn Council) | C2C tile | Tiles for a 50 × 60 in throw |
|---|---|---|---|
| 1 Super fine (fingering, sock) | 2.25–3.5 mm | about 0.4 in (1 cm) | 125 × 150 |
| 2 Fine (sport) | 3.5–4.5 mm | about 0.6 in (1.5 cm) | 85 × 102 |
| 3 Light (DK) | 4.5–5.5 mm | about 0.7 in (1.9 cm) | 68 × 82 |
| 4 Medium (worsted, aran) | 5.5–6.5 mm | about 0.9 in (2.2 cm) | 59 × 71 |
| 5 Bulky (chunky) | 6.5–9 mm | about 1.1 in (2.8 cm) | 45 × 54 |
| 6 Super bulky | 9–15 mm | about 1.3 in (3.4 cm) | 38 × 45 |
Blanket sizes in C2C
Blanket sizes are not standardized; these are the popular crochet sizes. At about 0.9 inches a tile in worsted:
| Blanket | Size | Tiles | Rows | Yarn for a one-color blanket |
|---|---|---|---|---|
| Baby | 36 × 36 in | 42 × 42 = 1,764 | 83 | about 1,623 yd |
| Lapghan | 36 × 48 in | 42 × 56 = 2,352 | 97 | about 2,164 yd |
| Throw | 50 × 60 in | 59 × 71 = 4,189 | 129 | about 3,854 yd |
| Twin | 66 × 90 in | 78 × 106 = 8,268 | 183 | about 7,607 yd |
| Queen | 90 × 100 in | 106 × 118 = 12,508 | 223 | about 11,507 yd |
A picture blanket takes a little more than a one-color one, because each color change leaves two ends to weave in. Choose a blanket size in the tool and your design is enlarged and given a border to reach it.
Swatch first
- Make 10 by 10 tiles (or 20 by 20 single crochets for tapestry) in the yarn and hook you will use.
- Measure it flat, without stretching, and enter how many tiles and rows fill 4 inches.
- Unravel and measure the yarn, or weigh the swatch and use the yards on the ball band, and enter it. The yarn figures then come from your own hands, not an average.
Working with many colors
- One bobbin per area. The tool counts the separate areas of each color: that is how many bobbins or small balls to wind. Larger areas need longer lengths.
- Change color on the last yarn over of the tile before, so the new color starts clean.
- Weave in as you go every few rows. A picture blanket can have hundreds of ends; leaving them all to the end is the most common reason one is never finished.
- Tick the rows as you finish them. The tracker remembers where you are on this device, and outlines the row on the picture.
Worked as tapestry crochet instead, the same little graph gives: Row 1 (RS, right to left, 4 sts): 3 A, 1 B; Row 2 (WS, left to right, 4 sts): 1 A, 1 B, 2 A; Row 3 (RS, right to left, 4 sts): 1 B, 3 A. Right-side rows are read right to left and wrong-side rows left to right. To knit any of these designs, the knitting chart maker uses the same patterns.
Questions people ask
Is the crochet pattern maker free?
Yes, all of it: the graph, every written row, the PDF, the text and spreadsheet files and the row tracker. There is no account, no limit on size or colors beyond what is sensible to crochet, and no mark on the files.
What do the written C2C rows mean?
Each row lists the colors in the order you make the tiles. “Row 4 (read up from the bottom, 3 tiles, increase at the bottom, decrease at the top): 2 B, 1 A” means: make two tiles in color B, then one in A, and on this row you add a tile at the bottom edge and stop adding at the top. The words in brackets tell you where the row starts on the graph and whether to increase or decrease at each end.
My second row goes the other way from the instructions. What do I do?
Tick “My row 2 goes the other way”. C2C can be held either way round; the box swaps the direction of every row so the counts match the way you work. The graph does not change.
How big will my blanket be?
Multiply the tiles by the size of one tile. In worsted yarn a C2C tile is usually about 0.9 inches, so 60 tiles across make about 51 inches. Choose your yarn weight, or tick “Use my own gauge” and enter your swatch, and the tool works it out.
How much yarn will I need?
In worsted yarn a C2C tile takes about 0.8 yards, worked out from published C2C patterns; the tool adds 15% spare. For a real figure, crochet a swatch of 10 by 10 tiles, measure or weigh the yarn it used, and enter it under your own gauge.
Can I make a blanket from a small design?
Yes. Under Size choose a blanket. The design is enlarged by the largest whole number that fits, each square becoming a block of tiles, and a border in the background color brings it up to the blanket size.
Can I use my own photo?
Yes. Choose a photo, say how many tiles across and how many colors. The picture is turned into squares on your device and is never uploaded. Fewer colors and a simple picture with strong shapes give the best result in yarn.
Does it do tapestry crochet?
Yes. Choose tapestry crochet and the rows are written for single crochet worked back and forth: right-side rows read right to left and wrong-side rows left to right. In tapestry crochet the colors not in use are carried inside the stitches, and the yarn figures include that carried yarn.