Cross stitch pattern maker
Draw a pattern square by square, or turn a photo into one. Free, with no account, and your picture never leaves your device.
From a picture
Trim the edges
Only the threads I own
Leave this empty to choose from all 454 DMC threads. The list is kept on this device, and is the same list as your thread stash.
Adjust the picture
Change the width or the colors and the pattern is made again from your picture.
Your picture stays on this device.
Or a blank pattern
Add a thread
A thread or bead from another brand
Anchor, Madeira, Cosmo, Mill Hill beads or any other. Type what is on the label and choose its color. It is printed in your key exactly as you type it.
Add words
Borders and motifs
Motifs: tap one, drag it into place, then tap “Place”. The first 50 are simple shapes in the thread you are using. The 136 pictures below them come in their own threads, about 30 stitches across.
Pictures adapted from Noto Color Emoji by Google. Artwork under the Apache License 2.0; font under the SIL Open Font License 1.1.
Build a sampler or monogram
More about each: sampler maker, monogram maker.
This starts a new pattern, sized to fit. For a monogram, type two or three initials and choose a large alphabet. Undo brings your old pattern back.
This pattern
Layers
You draw on the layer with the filled dot. Where two layers have a stitch in the same square, the upper one is stitched.
Show or hide
Is it pleasant to stitch?
Threads and stitches of each
Files
Open a file or start again
How to use it
- Work from the keyboard on a computer. B pencil, E eraser, G fill, I color picker, M select, L line, R rectangle, O oval, K backstitch, N knot, D bead, W clear background, H move. Ctrl+Z undoes and Ctrl+Shift+Z redoes. Plus and minus zoom, 0 fits the pattern, and Ctrl with the mouse wheel zooms too. The panels on the right fold away: click a heading, or hide the whole column with the arrow.
- Know the four buttons at the top. Undo takes back the last change and Redo puts it back. “Clear all” empties the pattern (Undo brings it back). “New” starts a fresh, empty pattern. Your work is kept on your device as you go, so closing the page loses nothing: it is there when you come back, until you press New.
- Choose how to start. Pick a photo or picture to turn into a pattern, or start a blank grid and draw.
- Set the size and colors. For a photo, choose how many stitches wide and how many thread colors. The pattern is made again each time you change them.
- Trim it and use your own threads. “Trim the edges” cuts away what you do not want stitched. Under “Only the threads I own”, type your DMC numbers and the pattern is made from those threads alone.
- Improve the picture. Under “Adjust the picture”, make it lighter, give it more contrast or stronger color, and the pattern is made again at once. “Blend threads” mixes neighboring threads for smoother shading, at the cost of more single stitches.
- Tidy it by hand. Draw, erase and fill with any thread. Tap a thread to draw with it, or use the dropper to pick one up from the pattern.
- Use the shapes and the selection. Draw straight lines, rectangles and ovals, outlined or filled. Select an area to move it, copy it, flip it or delete it.
- Add words. Type a name or a date, choose one of the stitch alphabets, and drag the words into place.
- Smooth an edge with part stitches. Choose half, quarter or three-quarter stitch beside the tools, then draw. Quarters and three-quarters sit in the corner of the square you tap, which rounds off a stepped edge. Draw a quarter in another thread in the opposite corner and the two share the square.
- Use the ready-made pieces. “Borders and motifs” adds a border round the pattern, one of 50 simple shapes in the thread you are using, or one of 136 pictures in their own real threads: animals, flowers, food, celebrations, home and travel. “Build a sampler or monogram” lays out your lines of words with a border and a motif in one step, ready to adjust.
- Outline with backstitch. The backstitch tool draws thin lines from hole to hole: small stitches along the grid or at 45 degrees, or one long stitch at any other slant.
- Add knots and beads. The French knot and bead tools place a dot on a hole, in the middle of a square, or halfway along an edge. Tap the same spot again to take it off.
- Work in layers. Under “Size and files”, add a layer for the outline, the lettering or a border, name it, hide it, move it above or below the others, or merge it down. Up to eight layers, saved in your pattern file. You can also hide the crosses to see only the backstitch, or the other way round. Slide “Your photo underneath” to see the photo through the empty squares and trace over it.
- Zoom with two fingers. On a phone or tablet, pinch to zoom and slide two fingers to move, whatever tool is chosen.
- Clear a background. After turning a photo into a pattern, tap the background with the clearing tool and the joined area of that color becomes bare fabric.
- Stitch along. When you start stitching, switch to “Stitch along” under the pattern. Tap or drag over the squares you have made and they turn pale. Tap a thread to work one color at a time. Your progress is kept on your device and saved in the pattern file.
- Read the report. “Is it pleasant to stitch?” counts lone stitches, threads that are hardly used and threads that look alike, and fixes each with one tap.
- Check the size. “Size and files” shows the finished size on your fabric and how many stitches each thread needs.
- Download. The free PDF has a cover with sizes and a color key, then a chart with a symbol for every thread.
Choosing a good photo
- One clear subject. A face, a pet or a flower against a plain background works far better than a busy scene.
- Good light and contrast. Dark, flat photos turn into muddy patterns. Brighten the photo first if you can.
- Crop close. Every stitch is precious. Cut away what you do not want before you choose the picture.
- Size decides detail. At 60 stitches wide a face is a suggestion; at 150 it is a likeness. Bigger also means many more hours.
What it does not do yet
The maker draws whole, half, quarter and three-quarter stitches and backstitch, in DMC threads. Two threads can share a square as a quarter beside a quarter, or a quarter beside a three-quarter. French knots and beads sit on a hole or halfway between two. Threads from other brands (Anchor, Madeira and the rest) are added by hand: you type the brand and number and choose the color, because no brand publishes a color list we are allowed to copy. We would rather say so than let you find out halfway through a project.
Questions people ask
Is my photo uploaded?
No. The picture is read and turned into a pattern inside your own browser. It is never sent to us or to anyone else.
How many colors should I choose?
Start with 12 to 16. Fewer colors are quicker to stitch and cheaper to buy; more colors keep more detail. Change the number and the pattern redraws, so you can compare.
How big can a pattern be?
Up to 1,000 by 1,000 stitches. A pattern that large is a project of many months, and it may be too big to keep in the browser: save it as a pattern file.
What does “tidy lone stitches” do?
A photo often leaves single stitches of one color scattered among another. They are slow to stitch and add little. Tidying gives each lone stitch the color around it.
Are the thread colors exact?
They are the closest DMC shades to each color in the picture, but a screen cannot show thread exactly. Check the skeins against your picture before you buy many.
Can I draw half stitches or backstitch here?
Yes to both. For backstitch, choose the backstitch tool and draw from hole to hole. For part stitches, choose half, quarter or three-quarter in the “Kind of stitch” list and draw with the pencil; a quarter goes in the corner of the square you tap, and a second thread can take the opposite corner of the same square.
Can I mark the stitches I have done?
Yes. Switch to “Stitch along” under the pattern, then tap or drag over the squares you have stitched. Pick one thread and the others fade, so you can finish a color at a time. The count and the percent done are shown, and the marks are kept on your device and inside the pattern file you save.
Can I use Anchor, Madeira or another brand of thread?
Yes. Under “Add a thread”, open “A thread or bead from another brand”, type the brand and the number on the label, and choose its color (or start from the color of a DMC number). It is drawn, counted and printed in the key like any other thread, and remembered on your device for next time. We do not ship a ready-made Anchor or Madeira list, because those lists are not free to copy.
Can I make a birth or wedding sampler, or a monogram?
Yes. Under “Start and threads”, open “Build a sampler or monogram”. Type the names and the date on separate lines, choose an alphabet, a border and a motif, and press “Build it”. The pattern is sized to fit and every part can then be changed by hand. For a monogram, type two or three initials and pick one of the large alphabets.
Can I open a pattern made in another program?
Yes, if that program can save an OXS file. WinStitch, MacStitch and several other programs and apps can. Choose “Open a pattern file” and pick the .oxs file. Whole, half, quarter and three-quarter stitches, backstitch, threads and stitched marks come in. Beads, knots and special stitches are left out, and the page tells you how many. You can also save your own pattern as OXS to use it elsewhere.
What is the stitchability report?
A plain list of what would make the pattern slow or fiddly: single stitches on their own, threads used for only a few stitches, and threads so alike that one would do. Each has a button that fixes it, and Undo puts it back.